This panel enables the ‘Parabolica’ panel (MTP-7) to connect to other panels by taking the track and borders back to the usual dimensions and distances but in the opposite direction from the MTP-8 S-curve. It can also be used ‘back to back’ with the standard ‘S’-curve (MTP-8) to make extended ‘U’ but that would then require another ‘S’ if using ‘Parabolica’ (MTP-7) in your circuit. It requires 2 Scalextric Radius 2 45 degree curves and 2 Radius 2 22.5 degree curves as well as 2 short straights.
Precision cut from 15 mm Moisture resistant MDF, as well as the track channel this panel has all the holes pre-drilled for fixing the ‘concrete’ wall, and adding the clips for tyre walls, fencing and advert boards.
Like all the other panels you can buy it with or without all the scenic parts needed to create the panel as shown in the pictures, including the wood and screws, and the ‘dominos’ for connecting this panel to other panels. Full build instructions are given, including an exploded view diagram showing where all the parts need to go, to make it really easy for you to finish it yourself. Track not included.
The panel is 700 mm wide x 802 mm deep, as shown in the Gallery diagram.